Emal Pentifalva PF-115 Protective M.F.

Emal PF-115 Protective M.F.
Scope: intended for the color of metal, wooden and other surfaces that are exposed to atmospheric influences, and for painting indoors.

Properties: enamel provides a high -glossary decorative, light -resistant coating. The coating consisting of two layers of the PF-115 enamel, applied to the prepared primed surface, retains protective properties in moderate climate for four years. The enamel film is resistant to temperature change from -50 ° C to +60 ° C.

Surface preparation: the stained surface should be dry, previously cleaned of dust, fat and other contaminants, rust, scale, and low -fat.

Coating: before using the PF-115, mix thoroughly. The enamel applies to the painted surface by spraying, dipping, jet dousing, brush or roller. Before use, if necessary, the enamel is diluted with solvent, white spirit (nephras C4 155/200), turpentine or their mixture in a ratio of 1: 1. When painting in an electric floor, the enamel is diluted with the RE-4V, RE-3V diluent. The drying time of each layer of enamel at a temperature of (20 ± 2) ° C is 24 hours. Enamel consumption on a single -layer coating depending on the color - (100-180) g/m2.

Precautions: when carrying out paintwork, as well as after their end, it is necessary to carefully ventilate the room. To protect your hands, use rubber gloves. Store enamel in tightly closed containers, protecting from moisture and direct sunlight.

Take care of the fire! Warranty period - 12 months from the date of manufacture.