WOODLED ROTOR Chandelier M - suspended on strings - American walnut

The Rotor lamp has an unusual design. Natural wood plates are inserted at an angle and make the item dynamic.#nbsp; The luminaire was awarded the international A'DESIDN AWARD and earned a bronze award in 2017.


Choosing the size of the luminaire
Choose the size based on the area you need to light.
The following is an approximate area lighting for a luminaire on a string suspension, m².
S: 8-10
M: 10-12
L: 12-15
1000: 15-20
XM: 10-14< br>XL:14-18

Diffuser
Removable diffuser in the shade allows you to replace the light bulbs and eliminate dust accumulated over time. Also, the lamp can be used without a diffuser for a brighter light output. Inside the plafond there are 4 cartridges in a chrome-plated housing on swivel mechanisms.

Suspension height
The height of the luminaire suspension can be adjusted after installation. It varies from 5 cm to 1.3 m. If you need a higher hanging height, please indicate this when ordering.

Types of mounting
If the room has low ceilings, you can choose another type of mounting, according to the type "tablet". The type of fastening is installed at the factory and cannot be changed during operation.
Additionally, it should be noted that the luminaire with the type of fastening "close to the ceiling" gives less illumination, since the light does not reflect from the surface of the ceiling, but only falls down into difference from the lampshade on a string suspension.

Light bulbs
Light bulbs are not included in the scope of delivery of the lamp, you can order them by selecting the appropriate tab in the product card.

Attention! The color of the wood may differ from the images on the site, as it is a natural material.
The lamps can be seen live in our showroom.

3D model
Instruction for ceiling Rotor
Instruction for Rotor on string suspension View product on the supplier's website