Signal former (vibro controller) a636

'Specifications_without_split': 'Production Products: 1. The range of the measured vibroscency, SKZ: 0 ... 10 mm/s \ n0 ... 20 mm/s \ n0 ... 50 mm/s \ n0 ... 100 mm/100 mm/ With. The range of measurements of the propagation of relative vibration transmission: 0 ... 125 μm \ n0 ... 250 μm \ n0 ... 500 μm \ n0 ... 1,000 μm. The measurement range of the static clearance: 0.2 ... 2.2 mm \ n0.3 ... 3.3 mm. The range of operating frequencies of the measured vibration science (uneven frequency response - 1 dB): 1 ... 1 000 Hz \ N2 ... 1,000 Hz \ N3 ... 1,000 Hz \ N5 ... 1,000 Hz \ n10 ... 1,000 Hz. The range of operating frequencies of the measured vibration digging (uneven frequency response - 1 dB): 1 ... 10,000 Hz \ N2 ... 10,000 Hz \ N3 ... 10,000 Hz \ N5 ... 10,000 Hz \ N10 ... 10,000 Hz. Maximum input charge (peak): ± 5,000 PKL. The maximum input voltage of alternating current: ± 5 V. The maximum input voltage of DC: 24 ± 2 V. Exit (current): 0 ... 20 mA \ n4 ... 20 mA. Range of operating temperatures: –40 ... +70 ° C. Data exchange in the information system: RS485. Input connector: screw terminals. Lesson connector: screw terminals. The measurement error in the working temperature range: ± 2 %. Measurement error: ± 2 %. IPE Sensor IPE voltage: 24 ± 2 V. The power voltage of sensors with an output by voltage: 24 ± 2 V. The power current of IPE sensors (± 10 %): 5.7 mA. Sensor power current (± 10 %) with voltage output: & lt; 50 mA. The parameters of the integrated comparators of the value of the set thresholds of the operation: 0.1 -100 mm/s. The parameters of the built -in comparators Step of the task of the operation thresholds: 0.1 (1) mm/s. Conditions for the issuance of excess signals: continuous excess with an informative signal of a given threshold value in \ nhati 0-100 s. The step of setting the time for excess threshold values: 1 p. Drimination mode: with lock or self -healing. The condition of self -healing: a decrease in the lesson from the threshold of the operation by 6 %. The delay in vibration control after the establishment of the working regime/ self -healing: 0 or 20 s. Information displayed on the built -in indicator: the values ​​of the measured SKZ of vibration rushing, relative vibration prevention or static clearance; \ N -coefficient of transformation of the sensor used; \ naver of the specified threshold thresholds; \ Nedodes of errors when the cable breaks and failing of the sensor; \ nzda time exceeding the thorough signs. . Power voltage: 18 ... 30 B. Consumption current: & lt; 200 mA. Fastening on DIN - Reiku: Yes. Mass: 200 g. A feature: Work with vibration transformers with built -in electronics of the IPE type, with built -in \ nelectronics with positive power supply and voltage output, with vortex \ n, signals; \ ndiagnostic analogue output; \ n measured parameters using spectral analysis (BPF) . '}