Signal former (vibro controller) a633

'Specifications_without_split': 'Production Products: 1. The range of the measured vibroscency, SKZ: 0 ... 10 mm/s \ n0 ... 20 mm/s \ n0 ... 50 mm/s \ n0 ... 100 mm/100 mm/ With. The range of operating frequencies of the measured vibration science (uneven frequency response - 1 dB): 1 ... 1 000 Hz \ N2 ... 1,000 Hz \ N3 ... 1,000 Hz \ N5 ... 1,000 Hz \ n10 ... 1,000 Hz. Output voltage: 0 ... 10 c. Exit (current): 0 ... 20 mA \ n4 ... 20 mA. Range of operating temperatures: –40 ... +70 ° C. Input connector: screw terminals. Lesson connector: screw terminals. The measurement error in the working temperature range: ± 2 %. Types of connected vibration transformers: IEPE, with voltage and negative power supply. IPE Sensor IPE voltage: + 24 ± 2 V. The power voltage of the sensors with a negative power supply exit: - 24 ± 2 V. The power current IEPE sensors (± 10 %): 5.7 mA. Dry contacts: to control vibro: lim1, lim2. Dry contacts: To control the connected sensor: OK. The parameters of the integrated comparators of the values ​​of the set thresholds of the operation of the VIBROKOSKI SKZ: 0.1 ... 100 mm/s. The parameters of the built -in comparators Step of the assignment of the thresholds of the vibro -skority: 0.1 (1) mm/s. The conditions for issuing signals (closed or open) contacts of the relay "AL1", "AL2", "AL3": continuous excess with an informative signal of a given threshold value within 0-100 s. The step of setting the time for the excess of threshold values ​​of vibration rushing: 1 p. Relay contacts operation mode: blocking/ self -healing. The condition of self -healing: a decrease in vibration from the threshold of the operation by 6%. The delay in vibration control after the establishment of the working regime/ self -healing: 0 or 20. The parameters of the “dry” contact of the switching current: & lt; 2 A. The parameters of “dry” contact voltage voltage: 0 ... ± 60 V. The information displayed on the built -in indicator: VIBROSKOSKI SKZ, sensor converting coefficient, specified thresholds, errors when cutting off the cable and failing of the sensor, adjustment of the exceeding time threshold values, relay contacts .. power voltage (± 10 %): 18 ... 36 b. Consumption current: & lt; 200 mA. Fastening on DIN - Reiku: Yes. Mass: 200 g. Feature: measurement of parameters is carried out using spectral analysis (BPF). '}