Signal former (vibro controller) a632

'Specifications_without_split': 'Production Products: 1. The maximum value of the measured vibration, SKZ: None. The operating frequency range of the measured vibration schedule (uneven Farm Code ± 10 %) FVH: 2.3.5,10.30 Hz (tuned by the user). The operating frequency range of the measured vibration schedule (uneven Farm Code ± 10 %) of the Federal Tax Service: 200.500.1 000.2,000 Hz (set up by the user). The maximum value of the measured vibration science, SKZ: 200 mm/s. The maximum value of the measured scope of vibration transmission, SKZ: 1,000 microns. Range of operating temperatures: –40 ... +70 ° C. Input connector: screw terminals. Output connector: BNC. The measurement error in the working temperature range: ± 2 %. Types of connected vibration transformers: IPE; 4-20 mA. Data exchange in the information system: RS485. Sensor supply voltage: IEPE, 4-20 Ma: 24 + 2 V. Power supply IPE sensors (± 10 %): 5.7 mA. Consumption current (terminal): 4 ... 20 mA. Numeria voltage (BNC): ± 5 V (signal). Dry contacts for monitoring the measured parameter: AL1, AL2, AL3. The step of the operation thresholds: 0.1 (1) mm/s. The conditions for issuing signals (closed or open) contacts of the relay "AL1", "AL2", "AL3": continuous excess with an informative signal of a given threshold value within 0-9 s. The step of setting the time for the excess of threshold values ​​of vibration rushing: 1 p. Relay contacts operation mode: blocking/ self -healing. The condition of self -healing: a decrease in vibration from the threshold of the operation by 6%. The delay in vibration control after the establishment of the working regime/ self -healing: 0 or 20. The parameters of the “dry” contact of the switching current: & lt; 1a. The parameters of "dry" contact voltage voltage: & lt; 30v. Differential synchronization line: there. Information displayed on the built -in indicator: the measured parameter, coefficient of transformation of the sensor, the values ​​of the specified thresholds, errors when cutting off the cable and failure of the sensor, setting the time for exceeding threshold values, the state of relay contacts. Power voltage (± 10 %): 18 ... 30 B. Consumption current: & lt; 200 mA. Fastening on DIN - Reiku: Yes. Mass: 200 g '}