Signal former (vibro controller) a631

'Specifications_without_split': 'Production Products: 1. The range of measured vibroscency, SKZ: 200 mm/s. The operating frequency range (uneven frequency response ± 3 dB): 2 ... 1,000 Hz. The range of operating frequencies of the measured vibration rushing (uneven Farm Code ± 3 dB): 10 ... 1,000 Hz. Range of operating temperatures: - 40 ... + 70 ° C. Type of input connectors: screw terminals. The measurement error in the working temperature range: ± 2 %. Types of connected vibration transformers: IEPE, 4-20 Ma, RS-485 (up to 8 pcs.). Types of input signals: 0-10 V, 4-20 Ma, RS-485. Data exchange: RS485. Sensor supply voltage: IEPE, 4-20 MA: 24 ± 2 V. The sensors power voltage: RS-485: 5 ± 0.5 V. The power current IEPE sensors (± 10 %): 5.7 mA. Dry contacts: to control vibro: AL1, AL2. Dry contacts: To control the connected sensor: OK. The step of the operation thresholds: 0.1 (1) mm/s. The conditions for issuing signals (closed or open) contacts of the relay "AL1", "AL2": continuous excess with an informative signal of a given threshold value within 0-9 s. The step of setting the time for the excess of threshold values ​​of vibration rushing: 1 p. Relay contacts operation mode: blocking/ self -healing. The condition of self -healing: a decrease in vibration from the threshold of the operation by 6%. The delay in vibration control after the establishment of the working regime/ self -healing: 0 or 20. The parameters of the “dry” contact: constant switching current: & lt; 1 A. The parameters of “dry” contact: & lt voltage: & lt; 30 V. Information displayed on the built -in indicator: SKZ: SKZ vibration ranges, coefficient of transformation of the sensor, the values ​​of the specified thresholds, errors in the cable break and failure of the sensor, setting the time for excess of threshold values, the state of relay contacts. Power (voltage): 24 B. Power (current): & lt; 200 mA. Fastening on DIN - Reiku: Yes. Mass: 200 g '}