Signal former (vibro controller) a621

'Specifications_without_split': 'Production Products: 1. The range of measurement of the amplitude of the vibration of the vibration: None. The range of measurement of the amplitude of the vibration rush: 1.41 ... 56.4 mm/s. Maximum input charge (peak): ± 5,000 PKL. The range of operating frequencies of the measured vibration score and vibration scribes (the uneven frequency response of ± 1 dB): 10 ... 1,000 Hz. The range of operating frequencies of the measured v and vibration schedule (uneven frequency response ± 1 dB): 10 ... 2 500 Hz. Exit (current): 4 ... 20 mA. Output voltage: 0 ... 5 V. The operating temperature range: - 40 ... + 70 ° C. The parameters of the built -in comparators: the values ​​of the specified thresholds of the operation of the SCZ vibro slip: None. The parameters of the built -in comparators: the values ​​of the set thresholds of the operation of the amplitude of the vibration absorption: None. The parameters of the built -in comparators: the step in the task of the thresholds of the operation of vibration schedule: None. The parameters of the built -in comparators: the values ​​of the specified thresholds of the operation of the VIBROSKOSKI SKZ: 2 ... 40 mm/s. The parameters of the built -in comparators: the values ​​of the specified thresholds of the operation of the amplitude of the vibration rush: 2.8 ... 56.4 mm/s. The parameters of the built -in comparators: the step in the task of the thresholds of the vibro -disco: 0.1 mm/s. Type of input connectors: screw terminals. The measurement error in the working temperature range: ± 2 %. Types of connected vibration transformers: charge. Data exchange: RS485. Dry contacts for the control of vibration score and vibration schedule: AL1, AL2. The conditions for issuing signals (closed or open) contacts of the relay "AL1", "AL2": continuous excess with an informative signal of a given threshold value within 0-9 s. The step of setting the time for the excess of threshold values ​​of vibration rushing: 1 p. Relay contacts operation mode: blocking/ self -healing. The condition of self -healing: a decrease in vibration from the threshold of the operation by 6%. The delay in vibration control after the establishment of the working regime/ self -healing: 0 or 20. The parameters of the “dry” contact: constant switching current: & lt; 0.15 A. The parameters of the "dry" contact: voltage of switching: & lt; 250 V. Contact parameters "Open collector": DC IC: & LT; 20 mA. Contact parameters “Open collector”: Collector voltage - emitter: & lt; 80 V. Contact parameters “Open collector”: Emitter voltage - collector: & lt; 7 V. Options of the digital code: the number of categories of the measurement result: 12. The parameters of the digital code output: Interface: RS-485. Digital code output parameters: exchange rate: 1,200; 2 400; 4 800; 9 600; 19 200; 38 400; 57 600; 115 200 bits/s. Information displayed on the built -in indicator: the SKZ of vibration scores and vibration schedule, the amplitude of vibration score and vibration, the sensor transformation, the values ​​of the specified thresholds, setting the time for excess of threshold values, the state of relay contacts (dry contacts and the open manifold). Power (voltage): 24 B. Power (current): & lt; 200 mA. Fastening on DIN - Reiku: Yes. Mass: 200 g '}