Breeds of blacksmithing

Material of corps parts - steel of 35 l.
TU according to GOST 11435

The anvil is a supporting blacksmithing tool for cold and hot metal processing by plastic deformation.
The anvil is a massive metal support on which the blanks are smoked.
A special through square hole on the front of the anvil allows you to install additional mandrels and devices.
The metal of the "faces" is polished and has surface hardening.
The conical edge of the anvil also has a through hole for the formation of “hats” of nails or rivets.
Inexpensive anvils weighing up to 95 kg are used for forging small decorative products with a large number of parts.
For example, for the manufacture of forged openwork lattices, small blacksmithing souvenirs, as well as for the manufacture of forged colors, buds or leaflets.
The anvil is the main supporting tool in the blacksmith, which allows you to do the most important operations of artistic forging: the formation of a "goose" and a dense paw, the production of curls, the manufacture of arcs and arches, and a plastic bending of metal.

Advantages of a one -rope of the console anvil
- Low price
- High -quality casting
- well -polished and hardened "face"
- A special hole for installing additional equipment
- a special hole for the manufacture of "hats" of nails and rivets
- Special holes for reliable fixation of the anvil.

The anvils are produced in various sizes, differ in weight and size of the working surface: weight - width and length of the slave. surfaces - price
3 kg - 40x120 mm - 2,490 rubles.
5 kg - 50x150 mm - 3 650 rubles.
10 kg - 60x190 mm - 5 900 rubles.
30 kg - 88x270 mm - 12 590 rubles.
50 kg - 105x320 mm - 18 690 rubles.
95 kg - 130x400 mm - 29 990 rubles.